Xtreamer Firmware ver 1.0.1

First Xtreamer Media Player update  - some post-release fixes.

What's new in this firmware?


Setup

1. Added multi languages - The new Firmware will now fully support OSD GUI and Subtitles in these languages. (Total of 22 languages will now be supported)

    Romanian, Arabic, Hebrew, Czech, Russian, Portuguese, Magyar (Hungrian), Polish, Swedish, Danish, Slovenian, Thai, Finnish, Dutch, Chinese, Korean, Italian, Espaniol,
    Deutsch, French, English (default)

2. Added 1080P 24HZ Support.

    GOTO Setup ==> AV ==> last menu ( 1080P 24HZ, Default : OFF )

3. Added option to turn off fan.

Photo

1. Add date on Phote information.
2. Fix bug for Display Photo file name on shuffle.

Music

1. Fix bug of RED and GREEN button behavior on playback music
2. Change Jukebox UI
3. Support to diaplay UTF16 ID3 Tag


User Interface

1. Add button on format Window and Confirm Window.

Download and installation instructions

1. Download the file.

2. Save the file on your computer (any directory).
3. Copy your file to a USB memory stick and use the USB host port on your Xtreamer.
3. Turn on your Xtreamer and navigate to the SETTINGS menu of your Xtreamer.
4. Find and select the FIRMWARE UPGRADE option
5. Navigate to the USB memory attached to your Xtreamer containing the firmware update file.

PLEASE NOTE: We do not recommend to upgrade the firmware via your network shared folders, as a loss in connection to the network could cause a break in the firmware upgrade process.

7. Once you have located the file, highlight the file and press ENTER on your remote to begin the upgrade process.
8. The Xtreamer will reboot and the process will be done in matter of few minutes. Once done the Xtreamer will reboot itself.

** CAUTION: DO NOT POWER-OFF THE XTREAMER DURING THE FIRMWARE UPGRADE PROCESS **

Emergency firmware download and installation instructions

Emergency Firmware Procedure ver.1.0.1

Before starting the procedure of emergency recovery - Please make sure you are using the AV RCA cables and not HDMI. Some TV HDCP protocols may cause problem to show the procedure on TV.

(1) Download the file Xtreamer Emergency
(2) Extract the file install.img (120 mb)
(3) Copy the “install.img” file to the root of the USB flash memory or HDD inside Xtreamer.
(4) Take out the unit out of the electricty power on the wall. wait 10 sec. Bring it back to the power
(5) In Remote control, press “Home” -> “3” -> “Power” not any other sequence. 
No need to use power first. Any other sequence will fail and nothing will happen as the call for this procedure is initiated by HOME button pressed first...Keep it pressed + press 3 + press power until you see the process starts.

If the firmware is not in the root of the USB the process will fail as the process seek the .img in the USB root.

Process Emergency upgrade should be visible on the screen if done correct.

Please note : After “intro” screen, if system boots without further update procedure, re-try emergency firmware update while powering-off the unit. It means you did not do it in the correct way. PRESS the HOME first and after 3 and after POWER while the unit is OFF.