Xtreamer > Firmware > Ver 2.2

This version introduces some exciting new features such as blu-ray  navigation, Ken Burns effect, custom skins support, new Internet service content etc.

What's new in this firmware?

1. Blu-ray simple navigation.

a. Chapter navigation.(GOTO or Next button)

b. Audio navigation(AUDIO button)

c. Subtitle navigation(SUBTITLE button)

2. Ken Burns slideshow effect

a. During Photo playback.

b. Setup->Playback-Ken burns Slideshow Effect.

3. Hue & Saturation

a. Setup->A/V->Hue, Saturation.

4. Multi Audio output.(HDMI only)

a. Output AAC/FLAC/OGG/WAV 5.1 PCM

b. Setup->A/V->Digital output.

5. Wireless network

a. Static IP

b. WPS

6. DVD/Blu-ray folder auto play.

a. If folder is DVD/Blu-ray folder structure, Appear select window of “Browser folder and auto playback”

7. New RSS video (HD) sites added in Internet menu.

8. Change custom GUI image.

a. Web page->Setup->TV skin.

b. Support 16bits BMP(656 format)

9. Custom RSS(Personal) option in “Internet” menu to use user’s customized script from internal HDD.


10. “Return” button acts as stop button, during video playback

11. Wireless Network performance.

12. eTrayz mount option from UDP to TCP

a. Media Library -> eTray.

13. Internet sites support H.264(mp4) streaming.

14. Internet video playback.

a. Default playback resolution from 320x240 to full screen

b. Fast forward 1.0x->0.5x->0.8x->1.2x->1.5x->2.0x

15. Photo display quality.

16. Recognize ext3 file system in internet HDD.

17. USB HDD detection much faster.

18. Web GUI downloading works stable.

19. Xtreamer Restart from Web GUI

a. Setup->NAS Mode->Restart

20. added fast forward speed 1.1x during Video playback.

21. Change volume window position from bottom to top.

Bugs fixed

22. Official DVD can’t playback used by GL811 chip DVD device.

23. MKV+DTS out of sync.

24. External USB HDD detect error.

a. Samsung S1 mini (1.8inch external USB storage)

25. If TS file has internal subtitle, can’t display subtitle.

26. Subtitle visible when screen saver is on.

Download and installation instructions

Download it here:

To upgrade the firmware from a 2** version please:
1.  Download the file.

2. Save the file on your computer (any directory) and unzip\unrar it.
3. Copy XTR file to a USB memory stick (formatted FAT32) and use the USB host port on your Xtreamer.
3. Turn on your Xtreamer and navigate to the SETTINGS -> SYSTEM menu options.
4. Find and select the FIRMWARE UPGRADE option
5. Navigate to the USB memory attached to your Xtreamer containing the firmware update file.

PLEASE NOTE: We do not recommend to upgrade the firmware via your network shared folders, as a loss in connection to the network could cause a break in the firmware upgrade process.

7. Once you have located the file, highlight the file and press ENTER on your remote to begin the upgrade process.
8. The Xtreamer will reboot and the process will be done in matter of few minutes. Once done the Xtreamer will reboot itself.
9. After the process is finished, you may want to do a RESTORE DEFAULT in the SETTINGS menu.


Emergency firmware download and installation instructions


Before starting the procedure of emergency recovery - Please make sure you are using the AV RCA cables and not HDMI. Some TV HDCP protocols may cause problem to show the procedure on TV.

(1) Download the Xtreamer Emergency
(2) Extract the file install.img
(3) Format a USB stick FAT32 and copy the “install.img” file to the root.
(4) Disconnect all the cables, remove WIFI antenna and any other USB storage devices. Take the unit out of the electricty power on the wall for 30 minutes. Plug the power in again.
(5) In Remote control, press “Home”(release button) -> “3”
(release button) -> “Power”(release button). Press the buttons with a 1 sec pause.

Any other sequence will fail and nothing will happen as the call for this procedure is initiated by HOME button pressed first...

If the firmware is not in the root of the USB the process will fail as the process seek the .img in the USB root.

Process Emergency upgrade should be visible on the screen if done correct.

Please note : After “intro” screen, if system boots without further update procedure, re-try emergency firmware update while powering-off the unit. It means you did not do it in the correct way. PRESS the HOME first and after 3 and after POWER while the unit is OFF.

It might be necessary to run the procedure several times. If you are not successful you may need to use another USB stick.