Download Firmware ver 3.5

Please select a download appropriate to your Device:

Xtreamer Prodigy Xtreamer SideWinder3

Firmware 3.5

How to Upgrade

To install just download and copy install.img to the root of a USB stick.
* Go to your Prodigy, turn it off by unplugging the power cord for few sec.
* Put the cord back but do not power the machine on.
* Plug the USB stick to a USB port at the back panel.
* When the machine is OFF press the power button for about 10 sec (you will see that the blue LED light is turning on but still keep your finger pressed on the power button until the power LED is turned off).
* When the LED is off you can release your finger and let it start flash the firmware.

Do not power off the machine while the update process is taking place. BE PATIENT IT WILL TAKE LONGER TIME THAN NORMAL IN THIS UPDATE. If you do you will brick your device and we will not honor it as RMA. If you are not sure what you are doing just dont do it.


Important note

With this update we ask you to watch out the TV screen while you perform the update. Once you start the process (that may take few long minutes) wait for the "Installation complete" message to appear in the end of the update process.
This will be the time you will need to remove the USB stick from the device before the device will boot.
Otherwise the Xtreamer live package will be installed in your USB and not to your internal HDD.

Do not remove the USB a single second before you will see the installation complete message shown on your TV screen.